Los Alamos National Laboratory Electrical Engineer 1-2 in Los Alamos, New Mexico
What You Will Do
This position will be filled at either the Engineer 1 or Engineer 2 level, depending on the skills of the selected candidate. Additional job responsibilities (outlined below) will be assigned if the candidate is hired at the higher level.
As a Utility Electrical System Engineer you will help manage and maintain the primary electrical transmission (115kV) and distribution (13.8kV) system for the Engineering Services – Utilities and Infrastructure Utility Power Team. As a system engineer you will be responsible for facility management, operations, construction, preventative and corrective maintenance, and compliance for NNSAL’s substations, transmission and distribution lines, switchgear, and all other major electrical assets for the UI Division. You will provide subject matter expertise on issues involving primary electrical systems and projects to ensure safety, quality, and reliability. You will participate as an integrated project team member to ensure that all LANL projects are designed and completed to acceptable standards in the area of the primary electrical system. You will contribute to the annual System Health Report of all utility electrical assets and help develop and refine scope and justification for future project funding consideration. You will prepare estimates for new utility tie-in requests and modifications. The successful candidate will be expected to perform the following duties of this position for each level, (but are not necessarily limited to):
Utility Electrical Engineer 1 ($85,400 - $139,600)
Introduction to electrical design and analyses in accordance with the national codes and standards for electrical engineering, including the IBC/IEBC, NESC, NEC, IEEE, NETA, NFPA 70E, and OSHA.
Introduction to utility electrical engineering matters, including all aspects of electrical safety, power quality, power monitoring, system protection, system operation and maintenance, disturbance event analysis, and critical power reliability/redundancy issues.
Introduction to power system studies including Short Circuit, Device Coordination, Load Flow, Equipment Sizing, and Arc Flash for high (115kV), medium (13.2kV) and low (<1000V) voltage equipment.
Contribute to electrical designs for sustainment, restoration, modernization, and construction projects to correct emergency power deficiencies, improve system reliability, and increase power availability for existing and new facilities, and external customers.
Develop electrical details, design/analysis calculations, specifications, etc. that incorporate the applicable design requirements for utility and facility projects.
Interface and coordinate with other engineering disciplines and the customer during the development of project deliverables.
Support the associated safety analyses, hazard evaluations, and lessons learned exercises.
Implement the LANL Conduct of Engineering (COE) Program.
Introduction to configuration management of the Technical Baseline Document List.
Review and implement NERC Reliability Standards and Requirements applicable to NNSAL’s current registration.
Utility Electrical Engineer 2 ($94,100 - $155,700)
In addition to what was outlined at the lower level, at this level:
Perform electrical design and analyses in accordance with the national codes and standards for electrical engineering, including the IBC/IEBC, NESC, NEC, IEEE, NETA, NFPA 70E, and OSHA.
Serve as a point of contact for utility electrical engineering matters, including all aspects of electrical safety, power quality, power monitoring, system protection, system operation and maintenance, disturbance event analysis, and critical power reliability/redundancy issues.
Review and perform power system studies including Short Circuit, Device Coordination, Load Flow, Equipment Sizing, and Arc Flash for high (115kV), medium (13.2kV) and low (<1000V) voltage equipment.
Review and perform electrical designs for sustainment, restoration, modernization, and construction projects to correct emergency power deficiencies, improve system reliability, and increase power availability for existing and new facilities, and external customers.
Coordinate with PNM and Los Alamos County for Bulk Electric System (BES) planning, operation, maintenance, and modifications.
Introduction to overhead distribution and line design and analysis.
Implement configuration management of the Technical Baseline Document List.
Contribute to condition assessment activities and generation of an annual System Health Report.
Perform Utility Impact Studies for new campus developments.
Develop new service installation cost estimates for customers.
What You Need
Minimum Job Requirements:
Utility Electrical Engineer 1
One (1) to Two (2) years of experience in a utility or industrial facility with emphasis on power systems.
Functional computer and networking skills.
Electronics troubleshooting skill and familiarity with diagnostic tools.
Ability to define unprecedented problems, collect data, establish facts, and draw valid conclusions by extending accepted methods or developing new ones.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
Ability to develop program work plans designed to improve or expand current service levels.
Additional Job Requirements for Utility Electrical Engineer 2
In addition to what was outlined at the lower level, at the Engineer 2 you will need these skills:
Demonstrated broad-based, engineering experience with projects involving electrical design for new facilities and facility modifications to include site distribution equipment.
Significant experience with electrical design and analyses in accordance with the national codes and standards for electrical engineering, including the IBC, NESC, NEC, IEEE, NETA, NFPA 70E, and OSHA.
Experience working with SKM or ETAP power tools or a similar power system analysis software package.
Familiarity with Power System Load Flow (PSLF) software or similar software for transmission system power flow modeling.
Familiarity with PLS-CADD or similar overhead line design software.
Demonstrated experience with the preparation of design/analysis calculations, specifications, details, drawings, as well as the preparation of special tests and inspections for the electrical discipline.
Knowledge of electrical engineering, principles, design guides and appropriate standards.
Knowledge of engineering work planning coordination.
Excellent communication skills (verbal and written).
Education/Experience at lower level: Position requires a Bachelor’s Degree in Electrical Engineering from an ABET-accredited college or university and 0 to 2 years of practical work experience.
Education/Experience at higher level: Position requires a Bachelor’s Degree in Electrical Engineering from an ABET-accredited college or university and a minimum of 3 years practical work experience to the degree necessary to perform the responsibilities outlined above.
Working knowledge of SEL relays and programming.
Working knowledge of typical electrical system and component testing per NETA, NFPA70B and IEEE Standards and Guides.
Knowledge of LANL Conduct of Engineering Program and DOE Orders and Standards applicable to Utility Electrical System design and implementation.
Engineer in Training (EIT) Certification - or certification that the candidate has passed the Fundamentals of Engineering (FE) exam. Professional Engineer registration desirable.
Working knowledge of PV design, installation, operation, and maintenance.
Working knowledge of Asset Suites.
Note to Applicants:
For full consideration for the position, please submit in addition to a comprehensive resume, a detailed cover letter that address the minimum requirements and any desired qualifications.
Location: This position will be physically located in Los Alamos, NM.
COVID Vaccine :
The COVID vaccine is mandatory for all Laboratory employees, on-site contractors, and on-site subcontractors unless granted an accommodation under applicable state or federal law. This requirement will apply to those working on-site, those teleworking, and all new hires.
Position commitment: Regular appointment employees are required to serve a period of continuous service in their current position in order to be eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the time required, they may only apply for Laboratory jobs with the documented approval of their Division Leader. The position commitment for this position is 1 year.
Where You Will Work
Located in beautiful northern New Mexico, Los Alamos National Laboratory (LANL) is a multidisciplinary research institution engaged in strategic science on behalf of national security. Our generous benefits package includes:
§ PPO or High Deductible medical insurance with the same large nationwide network
§ Dental and vision insurance
§ Free basic life and disability insurance
§ Paid childbirth and parental leave
§ Award-winning 401(k) (6% matching plus 3.5% annually)
§ Learning opportunities and tuition assistance
§ Flexible schedules and time off (paid sick, vacation, and holidays)
§ Onsite gyms and wellness programs
§ Extensive relocation packages (outside a 50 mile radius)
Directive 206.2 - Employment with Triad requires a favorable decision by NNSA indicating employee is suitable under NNSA Supplemental Directive 206.2 . Please note that this requirement applies only to citizens of the United States. Foreign nationals are subject to a similar requirement under DOE Order 142.3A.
Clearance: Q (Position will be cleared to this level). Applicants selected will be subject to a Federal background investigation and must meet eligibility requirements
for access to classified matter. This position requires a Q clearance which requires US Citizenship except in extremely rare circumstances. Dependent upon position, additional authorization to access nuclear weapons information may be required that may or may not be available to dual citizens depending upon the circumstances.
Eligibility requirements: To obtain a clearance, an individual must be at least 18 years of age; U.S. citizenship is required except in very limited circumstances. SeeDOE Order 472.2 for additional information.
New-Employment Drug Test: The Laboratory requires successful applicants to complete a new-employment drug test and maintains a substance abuse policy that includes random drug testing.
Regular position: Term status Laboratory employees applying for regular-status positions are converted to regular status.
Internal Applicants: Regular appointment employees who have served the required period of continuous service in their current position are eligible to apply for posted jobs throughout the Laboratory. If an employee has not served the required period of continuous service, they may only apply for Laboratory jobs with the documented approval of their Division Leader. Please refer to PolicyPolicy P701for applicant eligibility requirements.
Equal Opportunity: Los Alamos National Laboratory is an equal opportunity employer and supports a diverse and inclusive workforce. All employment practices are based on qualification and merit, without regard to race, color, national origin, ancestry, religion, age, sex, gender identity, sexual orientation or preference, marital status or spousal affiliation, physical or mental disability, medical conditions, pregnancy, status as a protected veteran, genetic information, or citizenship within the limits imposed by federal laws and regulations. The Laboratory is also committed to making our workplace accessible to individuals with disabilities and will provide reasonable accommodations, upon request, for individuals to participate in the application and hiring process. To request such an accommodation, please send an email to email@example.com or call1-505-665-4444 option 1. Employment Status
Contact Name C de Baca, Jessica Ann
Vacancy Name: IRC94436
Organization Name ES-UI/ Engineering Services Utilities & Infrastructure
Req ID: IRC94436